PROJECTORS FOR INDOOR MEDICAL CANNABIS CULTIVATION

STL H1-T04 Cannabis Indoor

The STL H1-04 device  uses a spectrum specially designed for the vegetative growth of cannabis indoor in rooms without sunlight. It is a full spectrum with high penetrationin the foliage consisting of a mixture of white LEDs, with the addition of full red (RED, HYPER RED, FAR RED) which produce a vigorous vegetative growth. 

This product does no have an high µmol/Joule efficiency but produces very consistent growth compared to the energy consumed; STL H1-04 thanks to the diffused optics and the high penetration spectrum, is perfect for mother plants dedicated to the production of cuttings.  

SPETTRO vegetativo INDOOR

TECHNICAL DATA

STL H1-04

Voltage

100÷277 VAC 47/63Hz

Power

250W

PFC

 ≥ 0.95

Lightsource

LED

White LED

80 NICHIA power LED

Red LED

16 NICHIA power LED

Nominal PPF

500 µmol/s (2 µmol/J)

Optic

Silicone DIFFUSED 60°X90°

Case

Aluminium / stainless steel

IP protection

IP67 / IP69K

Working temperature

-30°C +45°C

Dimensions

332x300x115mm

Weight

7.3 Kg

Working humidity

0÷98% R

Resistance degree IK

10

Insulation class

I

Lifetime

≥60.000 h L80

INDOOR FLOR - STL H1-T08

Cannabis Indoor, Perfect for amateur growing, flor spectrum, great results

INDOOR

STL H1-T08 Cannabis Indoor

The device STL H1-T08  line uses a spectrum designed for cannabis indoor cultivation in rooms without natural light, for the whole cicle of growth, vegetative and flowering. 

The spectrum is similar to natural light (FULL SPECTRUM), with the addition of a balanced proportion of blue 450 nm and 600 nm red that stimulate photosynthesis and encourage abundant flowerings. 

This spectrum has an excellent efficincy  µmol/Joule and above all allows for abundant and hight quality productions, compared to the energy consumed.  

SPETTRO T

TECHNICAL DATA

STL H1-T08

Voltage

100÷277 VAC 47/63Hz

Power

220W

PFC

 ≥ 0.95

Lightsource

LED

White LED

64 NICHIA power LED

Red LED

32 OSRAM power LED

Nominal PPF

635 µmol/s (2.88 µmol/J)

Optic

Silicone DIFFUSED 60°X90°

Case

Aluminium / stainless steel

IP protection

IP67 / IP69K

Working temperature

-30°C +45°C

Dimensions

332x300x115mm

Weight

7.3 Kg

Working humidity

0÷98% R

IK resistance degree

10

Insulation class

I

Lifetime

≥60.000 h L80

INDOOR FLOR - STL H3-T08-2B/2BD

Cannabis indoor, Perfect for professional crops, flor spectrum, excellent results and low consumption

INDOOR

STL H3-T08-2B/2BD Cannabis indoor

The solution with 2 STL INDOOR FLOR coupled has beed designed to facilitate installation in medium-sized boxes cannabis indoor (from 12x120cm to 100×150 cm). 

The central bar is designed to allow the customer to change the distance between the devices and adapt it to the dimensions of the box so as to obtain the best uniformity and efficiency. The gorup is supplied, on request, with dimmer 40-70-100% (2BD version).  

SPETTRO T

STL H3-T08-2B

TECHNICAL DATA

STL H3-t08-2bd

100÷277 VAC 47/63Hz

Voltage

100÷277 VAC 47/63Hz

440W

Power

440W

≥ 0.95

PFC

 ≥ 0.95

LED

Lightsource

LED

128 OSRAM power LED

White LED

128 OSRAM power LED

64 OSRAM power LED

Red LED

64 OSRAM power LED

1270 µmol/s (2.85 µmol/J) 

Nominal PPF

1270 µmol/s (2.85 µmol/J)

Silicone DIFFUSED 60°X90°

Optic

Silicone DIFFUSED 60°X90°

Aluminium / stainless steel

Case

Aluminium / stainless steel

IP67 / IP69K

IP protection

IP67 / IP69K

-30°C +45°C

Working temperature

-30°C +45°C

998÷1112x300x70mm

Dimensions

998÷1112x300x70

12 Kg

Weight

12 Kg

≥ 60.000 h L80

Lifetime

≥ 60.000 h L80

INDOOR FLOR - STL H3-T08-3B/3BD

Cannabis indoor, Perfect for professional crops, flor spectrum, excellent results and low consumption

ST H3-T08-3B/3BD

STL H3-T08-3B/3BD

The INDOOR FLOR  at 3 projecotros,  has also been designed for cannabis indoor box installation (100-120 cm x 200-240 cm). As with the 2B is it possible to change the distances between the devices to adapt them to the box and obtain the best uniformity and efficiency. 

The device can be supplied without dimmer (if used mainly for flowering) or with dimmer 40-70-100% (3BD version). 

SPETTRO T

STL H3-T08-3B

TECHNICAL DATA

STL H3-T08-3bd

100÷277 VAC 47/63Hz

Voltage

100÷277 VAC 47/63Hz

660W

Power

660W

≥ 0.95

PFC

 ≥ 0.95

LED

Lighsource

LED

192 OSRAM power LED

White LED

192 OSRAM power LED

96 OSRAM power LED

Red LED

96 OSRAM power LED

1900 µmol/s (2.88 µmol/J) 

Nominal PPF

1900 µmol/s (2.88 µmol/J)

Silicone DIFFUSED 60°X90°

Optic

Silicone DIFFUSED 60°X90°

Aluminium / stainless steel

Case

Aluminium / stainless steel

IP67 / IP69K

IP protection

IP67 / IP69K

-30°C +45°C

Working temperature

-30°C +45°C

1532÷1982x300x70mm

Dimensions

1532÷1982x300x70

19,6 Kg

Weight

19,6 Kg

≥ 60.000 h L80

Lifetime

≥ 60.000 h L80

INDOOR FLOR - STL H3-T08
2M/2MD
MODULAR SYSTEM

Cannabis indoor, Perfect for professional growing, flor spectrum, great results and professional installation

STL H3 T-08 modular system

STL H3-T08-2M/2MD Cannabis indoor

The STL H3-T08-2M/2MD MODULAR SYSTEM line has been designed to solve, in an optimal way, all situations that arise in cannabis indoor cultivation. Unlike greenhouses, build specifically for this purpose, indoor crops exploit existing premises, created for other uses, of various sizes and often not optimal. 

In this context, the cannabis indoor cultivation areas must adapt to the room, therefore, to make the most of the space, the rows will have various widths: 80/90/100 cm, but also 110/120/130/140/150. The same goes for the lenght, which can be 3, 4, 5, 6 metes but also 3,5 or 4,5. 

With the cannabis indoor  STL H3-T08 2M/2MD MODULAR SYSTEM line you can solve all these situations, because with the special optics, you can cover any row width, from 80 to 130 cm, simply by changing the height of the STL lamps.  

For example: for a width of 80 cm, the height will be 70/75 cm from the tops; for a width of 130 cm the height will be 110/115 cm. For a larger widths (140/150 cm), STL with inclined torque are used, described in the next section. The distance between the luminaires is then derived from the width. if, for example, the width is 120 cm, the distance will be 65÷70 cm;  if the width is 80 cm the distance will be about 1 m. 

Obviously, the lenght of the room must also be considered; if this is 5 m the solution is 5 projectors at a distance of 1 m, if the room is 4,5 m the distance will be reduced to 90 cm, in this case the illumination will be a little higher;  normally each STL should cover a cultivated area of 0,75/0,9 mq. 

COMBINATIONS

The characteristic of the MODULAR SYSTEM bars is precisely that of being able to provide a solution for all distances and therefore for all rooms and, with three devices alone, dozens of combinations can be made.   

STL H3-T08-2M for interdistances from 60 to 75 cm

STL H3-T08-2ML for interdistances from 80÷100 cm

STL H3-T08-3M for interdistances from 60÷80 cm. 

For more information we have created a specific manual on all possible solutions: “STL H APPLICATION NOTE“. This document provides valuable help to make the most of any environment and obtain perfect lighting for every type of cultivation.  

SPETTRO T

STL H3-T08-2m

TECHNICAL DATA

STL H3-t08-2md

100÷277 VAC 47/63Hz

Voltage

100÷277 VAC 47/63Hz

440W

Power

440W

≥ 0.95

PFC

 ≥ 0.95

LED

Light source

LED

128 OSRAM power LED

White LED

128 OSRAM power LED

64 OSRAM power LED

Red LED

64 OSRAM power LED

1270 µmol/s (2.88 µmol/J) 

Nominal PPF

1270 µmol/s (2.88 µmol/J)

Silicone DIFFUSED 60°X90°

Optic

Silicone DIFFUSED 60°X90°

Aluminium / stainless steel

Case

Aluminium / stainless steel

IP67 / IP69K

IP protection

IP67 / IP69K

-30°C +45°C

Working temperature

-30°C +45°C

900÷1050x332x70mm

Dimensions

900÷1050x332x70

from 600 to 750mm

Distance

from 600 to 750mm

12 Kg

Weight

12 Kg

≥ 60.000 h L80

Lifetime

≥ 60.000 h L80

INDOOR FLOR - STL H3-T08
2ML/2MLD
MODULAR SYSTEM

Perfect for professional growing, flor spectrum, great results and professional cannabis indoor installation

STL H3-T08-2ML

STL H3-T08-2ML/2MLD CANNABIS INDOOR

The STL H3-T08-2ML/2MLD MODULAR SYSTEM line has been designed to solve, in an optimal way, all situations that arise in cannabis indoor cultivation. Unlike greenhouses, build specifically for this purpose, indoor crops exploit existing premises, created for other uses, of various sizes and often not optimal. In this context, the cultivation areas must adapt to the room, therefore, to make the most of the space, the rows will have various widths: 80/90/100 cm, but also 110/120/130/140/150. The same goes for the lenght, which can be 3, 4, 5, 6 metes but also 3,5 or 4,5. 

Even with this MODULAR SYSTEM line you can solve all these situations, because with the special optics, you can cover any row width, from 80 to 130 cm, simply by changing the height of the STL H lamps.  

For example: for a width of 80 cm, the height will be 70/75 cm from the tops; for a width of 130 cm the height will be 110/115 cm. For a larger widths (140/150 cm), STL with inclined torque are used, described in the next section. The distance between the luminaires is then derived from the width. if, for example, the width is 120 cm, the distance will be 65÷70 cm;  if the width is 80 cm the distance will be about 1 m. 

Obviously, the lenght of the room must also be considered; if this is 5 m the solution is 5 projectors at a distance of 1 m, if the room is 4,5 m the distance will be reduced to 90 cm, in this case the illumination will be a little higher;  normally each STL should cover a cultivated area of 0,75/0,9 mq. 

COMBINATIONS

The characteristic of the MODULAR SYSTEM bars is precisely that of being able to provide a solution for all distances and therefore for all rooms and, with three devices alone, dozens of combinations can be made.   

STL H3-T08-2M for interdistances from 60 to 75 cm

STL H3-T08-2ML for interdistances from 80÷100 cm

STL H3-T08-3M for interdistances from 60÷80 cm. 

For more information we have created a specific manual on all possible solutions: STL APPLICATION NOTE“. This document provides valuable help to make the most of any environment and obtain perfect lighting for every type of cultivation.  

SPETTRO T

STL H3-T08-2ml

TECHNICAL DATA

STL H3-T08-2mld

100÷277 VAC 47/63Hz

Voltage

100÷277 VAC 47/63Hz

440W

Power

440W

≥ 0.95

PFC

 ≥ 0.95

LED

Light source

LED

128 OSRAM power LED

White LED

128 OSRAM power LED

64 OSRAM power LED

Red LED

64 OSRAM power LED

1270 µmol/s (2.88 µmol/J) 

Nominal PPF

1270 µmol/s (2.88 µmol/J)

Silicone DIFFUSED 60°X90°

Optic

Silicone DIFFUSED 60°X90°

Aluminium / stainless steel

Case

Aluminium / stainless steel

IP67 / IP69K

IP protection

IP67 / IP69K

-30°C +45°C

Working temperature

-30°C +45°C

1100÷1300x332x70mm

Dimensions

1100÷1300x332x70mm

from 800 to 1000mm

Distance

from 800 to 1000mm

12,25 Kg

Weight

12,25 Kg

≥ 60.000 h L80

Lifetime

≥ 60.000 h L80

INDOOR FLOR - STL H3-T08
3M/3MD
MODULAR SYSTEM

Perfect for professional growing, flor spectrum, great results and professional installation

STL H3-T08-3M

STL H3-T08-3M/3MD CANNABIS INDOOR

The STL H3-T08-3M/3MD MODULAR SYSTEM line has been designed to solve, in an optimal way, all situations that arise in indoor cultivation. Unlike greenhouses, build specifically for this purpose, indoor crops exploit existing premises, created for other uses, of various sizes and often not optimal. In this context, the cultivation areas must adapt to the room, therefore, to make the most of the space, the rows will have various widths: 80/90/100 cm, but also 110/120/130/140/150. The same goes for the lenght, which can be 3, 4, 5, 6 metes but also 3,5 or 4,5. 

With this STL H3-T08-3M/3MD  MODULAR SYSTEM line you can solve all these situations, because with the special optics, you can cover any row width, from 80 to 130 cm, simply by changing the height of the STL H lamps.  

For example: for a width of 80 cm, the height will be 70/75 cm from the tops; for a width of 130 cm the height will be 110/115 cm. For a larger widths (140/150 cm), STL with inclined torque are used, described in the next section. The distance between the luminaires is then derived from the width. if, for example, the width is 120 cm, the distance will be 65÷70 cm;  if the width is 80 cm the distance will be about 1 m. Obviously, the lenght of the room must also be considered; if this is 5 m the solution is 5 projectors at a distance of 1 m, if the room is 4,5 m the distance will be reduced to 90 cm, in this case the illumination will be a little higher;  normally each STL should cover a cultivated area of 0,75/0,9 mq.   

COMBINATIONS

The characteristic of the MODULAR SYSTEM bars is precisely that of being able to provide a solution for all distances and therefore for all rooms and, with three devices alone, dozens of combinations can be made.   

STL H3-T08-2M for interdistances from 60 to 75 cm

STL H3-T08-2ML for interdistances from 80÷100 cm

STL H3-T08-3M for interdistances from 60÷80 cm. 

For more information we have created a specific manual on all possible solutions: STL APPLICATION NOTE“. This document provides valuable help to make the most of any environment and obtain perfect lighting for every type of cultivation.

SPETTRO T

STL H3-T08-3m

technical data

STL H3-T08-3md

100÷277 VAC 47/63Hz

Voltage

100÷277 VAC 47/63Hz

660W

Power

660W

≥ 0.95

PFC

 ≥ 0.95

LED

Light source

LED

192 OSRAM power LED

White LED

192 OSRAM power LED

96 OSRAM power LED

Red LED

96 OSRAM power LED

1900 µmol/s (2.88 µmol/J) 

Nominal PPF

1900 µmol/s (2.88 µmol/J)

Silicone DIFFUSED 60°X90°

Optic

Silicone DIFFUSED 60°X90°

Aluminium / stainless steel

Case

Aluminium / stainless steel

IP67 / IP69K

IP protection

IP67 / IP69K

-30°C +45°C

Working temperature

-30°C +45°C

1500÷1900x332x70mm

Dimensions

1500÷1900x332x70mm

from 600 to 800mm

Distance

from 600 to 800mm

18,40 Kg

Weight

18,40 Kg

≥ 60.000 h L80

Lifetime

≥ 60.000 h L80

INDOOR FLOR - STL H3-T08
2/2D

Perfect for professional growing, flor spectrum, great results and professional installation

STL H3-T08 2

STL H3-T08-2/2D

The group with 2 devices INDOOR FLOR, coupled and inclined 15°,  has been designed for indoor cultivation with width of 1,4-1,5 m. With this solution, a high uniformity of low is obtained on all plants, even of different heights; and a dispersion of light energy, outside cultivation, of less than5%.  The pairs of luminaires can be positioned at a distance of 90-100-110-120 cm from each other; and this makes it possible to find the optimal solution in every change.  The unit is supplied in 2M version (without dimmer) and 2MD version, with 40-70-100% dimmer.  

SPETTRO T

STL H3-T08-2

technical data

STL H3-T08-2d

100÷277 VAC 47/63Hz

Voltage

100÷277 VAC 47/63Hz

440W

Power

440W

≥ 0.95

PFC

 ≥ 0.95

LED

Light source

LED

128 OSRAM power LED

White LED

128 OSRAM power LED

64 OSRAM power LED

Red LED

64 OSRAM power LED

1270 µmol/s (2.88 µmol/J) 

Nominal PPF

1270 µmol/s (2.88 µmol/J)

Silicone DIFFUSED 60°X90°

Optic

Silicone DIFFUSED 60°X90°

Aluminium / stainless steel

Case

Aluminium / stainless steel

IP67 / IP69K

IP protection

IP67 / IP69K

-30°C +45°C

Working temperature

-30°C +45°C

140x300x100mm

Dimensions

140x300x100mm

12,5 Kg

Weight

12,5 Kg

≥ 60.000 h L80

Lifetime

≥ 60.000 h L80

INDOOR FLOR - F L O R A

Perfect for amateur growing, flor spectrum, great results and very low consumption

INDOOR

FLORA

FLORA is a lamp designed for small boxes (70/75 cm x 70/75 cm) or, in pairs, for boxes from 75×150 cm. The optimum distance from the tops is 30-40 cm, sufficient to ensure a flux of 500/600 µmol/mq.  The optics are made of silicone and the heat dissipation is mainly from the front, as in STL devices. The lamp is equipped with   40-70-100% dimmer. The spectrum is INDOOR FLOR. 

Best led grow lights for indoor plants, led grow lights for indoor plants

Are you growing indoors? You need best LED grow lights for indoor plants. They are capable of offering the type of light your crops need to boost healthy development and yield implausible flower. LEDs provide more than just enhanced efficiency and cooler temperatures.

A major benefit of utilizing led grow lights for indoor plants is the huge continuum of energy they offer. When you select LED, you don’t have to worry about switching out lights as your crops mature through their growth cycle. Even superior — you can essentially install a system that’s tailored particularly to the type of crop you cultivate

 

SPETTRO T

technical data

flora

Voltage

100÷277 VAC 47/63Hz

Power

150W

PFC

 ≥ 0.95

Light source

LED

White LED

48 NICHIA power LED

Red LED

16 OSRAM power LED

Nominal PPF

405 µmol/s (2.7 µmol/J)

Optic

Silicone LARGE 90°X90°

Case

Aluminium / stainless steel

IP protection

IP65

Working temperature

-20°C +40°C

Dimensions

560x560x116mm

Weight

6,4 Kg

Lifetime

≥ 60.000 h L80